How to Perform D Link WiFi Extender Setup?
Are you troubled by a poor internet connection? Does the blurring of your Skype calls scare you? Do you get knocked out in an online game due to an intermittent connection? If you answered all these questions in a yes, then performing D Link WiFi extender setup will bring an end to your misery. Because a Dlink WiFi extender has the potential to turn dead zones into fun zones. Not only that, you also need not worry about a patchy internet connection in the farthest zone of your house after doing D Link WiFi extender setup. Here, we will give a detailed description of how to set up a Dlink WiFi extender in a hassle-free way.
There are different methods to perform D Link WiFi extender setup process. You can set up your Dlink WiFi extender using the Manual method, via the WPS button, or with the help of the D-Link WiFi app. So, let’s get started with the detailed guide to install a Dlink WiFi extender using all three methods.
D Link WiFi Extender Setup Using Manual Method
The manual method is one of the most conventional methods to do D Link WiFi extender setup. For setting up a Dlink WiFi extender using the Manual method, make sure you have access to the following:
- High-speed internet connection.
- An already configured router.
- An Ethernet cable that is free from cuts.
- The default D-Link extender login credentials.
- Need not to mention, your Dlink WiFi extender.
The moment you fulfil the prerequisites, commence the D Link WiFi extender setup process. Here’s how to set up a Dlink WiFi extender using the Manual method:
- Place your Dlink WiFi extender in the same room as the already configured router.
- Connect your Dlink WiFi extender to the router using an Ethernet cable.
- Now, plug your device into the wall outlet and press the Power button.
- The next thing you need to do is to open a web browser. So, do the same, and type the default web address of the Dlink WiFi extender into the URL field.
- Press the Enter key to reach the D-Link extender login page.
- As soon as the page appears, enter the default D-Link extender login credentials into the fields provided.
- Click the Log In button.
- You will get redirected to the configuration page of the Dlink WiFi extender.
- Now, follow the instructions on the D Link WiFi extender setup wizard and complete the installation process.
- Once you’re done with that, feel free to place your Dlink WiFi extender at the location of your choice.
- Now, connect your wireless client devices to the extender’s network and enjoy surfing the internet.
That’s all about how to perform D Link WiFi extender setup process using the Manual method. Just in case you are unable to configure your Dlink WiFi extender using the aforementioned steps, get in touch with our experts to seek their help.
D Link WiFi Extender Setup Using WPS Method
Setting up a Dlink WiFi extender using the WPS method is one of the easiest methods. All the prerequisites to perform D Link WiFi extender setup via the WPS method remains the same except that the router should support the WPS button. Also, you don’t need an Ethernet cable if you are setting up your Dlink WiFi extender using the WPS method.
Execute the following instructions in order to do D Link WiFi extender setup via the WPS method:
- Power up your Dlink WiFi extender.
- Now, start looking for the WPS button on your Dlink WiFi extender.
Note: The location of the WPS button on your Dlink WiFi extender varies. So, you need to check all the sides of your extender. - Found? Great! Now, press it carefully.
- Is the status of the WPS LED on your Dlink WiFi extender solid green? Yes?
- Congratulations! You’ve successfully done D Link WiFi extender setup using the WPS method.
If the WPS LED on your Dlink WiFi extender is blinking, it means it is trying to establish a connection with the router. It will turn green after some time. On the off chance, it doesn’t, ping our experts to help you with the D Link WiFi extender setup process.
D-Link Extender Setup Without WPS
Want to set up a Dlink WiFi extender without WPS or Manual method? Use the mobile application. Performing D Link WiFi extender setup using the mobile application is easier than you imagine. All you need to do is, download the D-Link WiFi app. The app can be easily accessed on any supported Android or iOS device.
How to Download the D Link WiFi App?
Before starting with D Link WiFi extender setup, download the D-Link WiFi app on your mobile phone. Own a tablet? No worries, the D-Link WiFi app can be installed on a tablet too. Read the following instructions to download the D-Link app:
- Unlock your smartphone and move to the Google Play Store or App Store as per its availability.
- Search for the D-Link WiFi app and hit the Download button.
- The installation process may take some time.
Caution: Avoid minimizing the tab while the D-Link WiFi app is getting installed on your mobile device.
Now, head over to perform D Link WiFi extender setup.
D-Link Extender Setup via D-Link WiFi App
Here are the do-follow instructions in order to set up a Dlink WiFi extender using a mobile application:
- Consider charging your mobile phone or tablet before doing anything else with the extender so that you won’t run out of battery during the D Link WiFi extender setup process.
- First of all, ensure that your Dlink WiFi extender and the already configured router are placed in the same room.
- Now, switch on your Dlink WiFi extender and connect it to the router.
- In a while, launch the D-Link WiFi app from the home screen of your mobile device.
- Tap the ‘Install a New Device’ button.
- Now, tap the Dlink WiFi extender model you own from the product list.
- Tap the Next button to proceed further.
- Use the D-Link extender login details to log in to your WiFi device.
- Now, you will be welcomed by a screen consisting of step-by-step guidelines.
- Follow the on-screen instructions and complete the D Link WiFi extender setup process.
Kudos! You did it. Your Dlink WiFi extender is all set to take your internet experience on the fly. So, connect your WiFi-enabled devices to the extender’s network and use the internet the way you want.
How to Access D-Link Extender Login Page?
After setting up a Dlink WiFi extender, users need to tweak its settings, update the firmware, and do much more. All this can be done by accessing the D-Link extender login page. So, learn how to perform D-Link extender login with the help of the instructions given below:
- First of all, consider connecting your Dlink WiFi extender to the existing router either wirelessly or with the help of an Ethernet cable.
- Now, get access to a computer or a laptop.
Note: The D-Link extender login page can be accessed on any Windows, Apple, Mac OS, or Linux-based operating system. - Open any web browser like Safari, Chrome, Internet Explorer, or Firefox.
- Now, access dlinkap.local and reach the D-Link extender login page.
- Here, you will be prompted to provide the extender’s default username and password.
- Type the D-Link extender login credentials into the given fields.
- Click the Log In button to proceed further.
- You will be taken to the web-based configuration utility of your Dlink WiFi extender.
In this way, you can successfully log in to your Dlink WiFi extender. If you run out of luck and are unable to perform D-Link extender login, then figure out the reasons that have led you to the issue.
Why You Can’t Access D-Link Extender Login Page?
Given below is the list of dominant reasons that prevent users like you from accessing the D-Link extender login page:
- Your Dlink WiFi range extender might be receiving an inadequate power supply.
- There is too much distance between your Dlink WiFi extender and the existing modem.
- The computer you are using to access the D-Link extender login page is equipped with access security.
- You are using the incorrect web address to access the D-Link extender login page.
- You’ve entered the web address in the search bar of the web browser.
- The D-Link extender login details entered by you are incorrect.
- The web browser you are currently using to perform the D-Link extender login is outdated.
- There are cache, cookies, and browsing history accumulated over your web browser.
- Your extender has fallen victim to various technical glitches.
- The Dlink WiFi extender has not been configured properly.
Now that you’ve become aware of the reasons that might have led you to the D-Link extender login issues, you can eradicate them easily by working on them. Just in case you fail to get the issue fixed, don’t hesitate to contact our experts.
Fixed: Can't Access D Link Extender Login Page
Give a shot to the following hacks in order to solve the problems you are facing while accessing the D Link extender login page:
Check the Power Outlet
Start troubleshooting the issue by checking the power outlet. See whether it is in a working state or not. Just in case it is damaged, either get the current power outlet fixed or use another one to power up the D'Link range extender.
Bring Extender Close to Router
Another thing you can do to fix the can't access D Link extender login page is to reduce the distance between the D'Link range extender and the host router. Doing so will facilitate your Dlink WiFi extender to communicate effectively with the router. However, keep in mind to maintain a safe distance between them. Else, it can result in a clash of signals of both WiFi devices creating more trouble than you're already struggling with.
Hardwire the Connection
A lot of users ignore creating a hardwire connection between the D Link WiFi range extender and router. But, believe us, using a hardwire connection can work wonders for you. It not only strengthens the internet speed but also helps you to access the D Link extender login page without any difficulty. However, you need to make sure that the Ethernet cable used is free of cuts.
Disable Excess Security
The antivirus software and firewall installed on your PC are fine until and unless they don't prevent you from accessing the D Link extender login page. Therefore, consider temporarily disabling the firewall on the PC before you step ahead to log in to your Dlink WiFi extender.
Use the Correct Web Address
he web address you are using to access the login page of your D'Link range extender should be correct. Remember that a single mistake might lead you to a page you don't want to access. The correct web address to access the D Link extender login page is http //dlinkap.local.
Don't Use the Search Bar
The default web address of your Dlink WiFi extender won't lead you to the login page until you don't enter it into the correct field. Keep in mind that entering http //dlinkap.local into the search bar of your web browser won't produce any result. To access the D Link extender login page with ease, type http //dlinkap.local into the address bar of the web browser.
Update the Web Browser
The D Link extender login page is not compatible with an outdated version of the web browser. Know that you can log in to your Dlink WiFi extender using an updated java-enabled web browser only. Therefore, navigate to the settings of the web browser and update it. Once done, check if you are able to log in to your D Link WiFi range extender.
Clear the Browser Cache
To log in to your D link WiFi range extender without any hassle, consider accessing the browser's settings and clearing the cache, cookies, and browsing history.
Relocate the D'Link Range Extender
The incorrect location of your D'Link range extender is a major reason that won't let you log in to it. Perhaps, you've placed it in a location where its WiFi signals are getting interfered. Therefore, consider eliminating the WiFi interference. To do so, make sure to place the extender away from corners, concrete walls, cordless phones, televisions, fish tanks, mirrors, metal objects, etc. Besides, avoid placing the D Link WiFi range extender near Bluetooth gadgets.
Eliminate Technical Glitches
Technical glitches not only tend to prevent you from accessing the D Link extender login page but also are capable of making the extender non-functional. Thankfully, these glitches can be easily overcome by rebooting the D'Link range extender.
Here's how to reboot your D Link WiFi range extender:
- Switch off your Dlink WiFi extender and unplug it from the power outlet.
- Wait for some time.
- Now, plug the D'Link range extender back into the wall outlet and switch it on.
After rebooting the extender, check whether you're able to access the D Link extender login page.
Reset the Dlink WiFi Extender
Are you still unable to access the D Link extender login page? No worries! Try the ultimate hack of resetting the D'Link range extender. It will wipe out all the current settings of the WiFi device and allows you to perform D Link extender setup from scratch. To reset your Dlink WiFi range extender, follow the instructions given below:
- Ensure that the D Link WiFi range extender is receiving an adequate electricity from the wall outlet.
- Once ensured, start finding the Reset button on your D'Link range extender.
- Now, take a paper clip.
- Use the paper clip to press and hold the Reset button.
- Your Dlink WiFi extender will get restored to the factory default mode.
Now, perform D Link extender setup from scratch. If you're still facing issues while accessing the D Link extender login page, get in touch with our well-versed technicians without any hesitation.
After logging in to your D Link WiFi range extender successfully, you can tweak its settings. But, the first change you need to make is to your D'Link range extender admin password. This is because the default password of your Dlink WiFi extender is known to every second person. It means anyone can log in to your WiFi device and access its settings. Thus, changing the D Link extender login password is an effective way to prevent your WiFi device. So, let's learn about the process to change the default admin password of the D'Link range extender:
How to Change D Link Extender Login Password?
- After connecting your D'Link range extender to the router, access http //dlinkap.local.
- You will reach the D-Link extender login page.
- Now, enter the default username and password of your D Link WiFi range extender into the given fields.
- Click the Log In button.
- The D Link extender setup wizard will come into view.
- Now, navigate the cursor to the Management tab at the top-right corner of the screen.
- Thereafter, select the Admin option from the drop-down menu.
- Afterwards, locate the Admin Password option and enter the new password of your D'Link range extender into it.
Note: You can also enable CAPTCHA graphical authentication in order to prevent unauthorized access via automated means.
- Click the Save button to save the new configuration.
In this way, you can change the admin password of your WiFi device by accessing the D Link extender setup wizard. Keep in mind to use the new admin password the next time you wish to log in to your D Link WiFi extender. However, feel free to contact our experts if you can't log in to the Dlink WiFi extender.
After changing the admin password of your Dlink WiFi extender, you also need to change its SSID. Doing so will help you to easily identify your D Link WiFi range extender name on the network list. So, without any delay, let's discuss the steps to change the SSID of the D'Link range extender.
How to Change D'Link Range Extender SSID?
Follow the below-mentioned guidelines in order to change the SSID of your D Link WiFi range extender:
- Perform D Link extender login using by accessing http //dlinkap.local and using the extender's admin details.
- The moment you get redirected to the D Link extender setup wizard, move the cursor to the Settings tab.
- Select the Settings option to reveal a drop-down menu.
- Now, click the Extended WiFi option.
- Thereafter, enter a new SSID of your D Link WiFi range extender into the WiFi Name (SSID) field.
Note: You can also change the Security Mode and WiFi password of your D'Link range extender on the same window.
- Lastly, click Save.
In this manner, you can change the SSID of your D Link WiFi range extender by accessing http //dlinkap.local. Now, you'll see the extender's new SSID on the network list. Therefore, in order to connect your client devices to the Dlink WiFi extender network, use the new SSID.
Now that you've changed the admin password and SSID of your D'Link range extender, it is time to improve its efficiency.
FYI, keeping the D'Link extender firmware updated is one of the finest methods to keep the extender's performance at peak. Also, updating the firmware helps in eliminating minor bugs and errors. So, let's have a glance at the steps to update the firmware of your WiFi device by accessing the D Link extender setup wizard.
How to Update D'Link Extender Firmware?
- Open an updated internet browser on your PC or laptop.
- Download the firmware file of your D Link WiFi range extender.
- Extract the Dlink WiFi extender firmware file using unzip tools.
- Once done, open a new tab on the internet browser and perform D Link extender login by accessing http //dlinkap.local.
- On the D Link extender setup wizard, click Management > Upgrade.
- Now, click the Select File button under the Upgrade Manually option.
- Select the firmware file and click Open.
- Afterwards, click Upload to finalize the D'Link extender firmware update process.
- Wait for some time.
- Your Dlink WiFi extender will reboot after the completion of firmware update.
That's how you can update your device by accessing the D Link extender setup wizard. However, if you feel stuck at any point, reach out to our experts and get the problem resolved in a matter of minutes. Our experts are working 24/7 to help you resolve the D Link WiFi range extender issues.
Disclaimer: We at d-linkextendersetup.com provide online support and information for issues with D Link WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.