How to Do D-Link DAP-1520 Setup?

DAP-1520 extender is one of the marvelous networking devices manufactured by D-Link. It extends the range of the existing wireless network to provide a better internet experience in every nook and cranny of the house. Therefore, if you are fond of doing bandwidth-hungry activities, performing D-Link DAP150 setup will be a good idea. Wondering how to do D Link WiFi extender setup? No worries, we’ve got you covered. Here, we will provide you with the steps to set up your D-Link DAP-1520 extender using various methods. Here we go!

There are various methods to perform D-Link DAP-1520 setup. You can do it either using the Manual method, via the WPS button or with the help of the QRS mobile application. Now let us shed light on each method one by one.

D-Link DAP-1520 Setup | Manual Method

Before you hop up to the steps to perform D-Link DAP-1520 setup, make sure you have access to the things mentioned below:

A super-fast internet connection
An already configured router
An Ethernet cable
The default login details of your D-Link DAP-1520 extender
And, certainly your D-Link DAP-1520 extender.

Once you get access to all these things, start performing D-Link DAP-1520 setup. Given below is a set of instructions explaining how to do D Link WiFi extender setup using the Manual method:

First of all, plug your D-Link DAP-1520 extender into an available power outlet near the router.
Turn on your Dlink WiFi extender by pressing the Power button and let the power LED become solid green.
Open a web browser on your computer.
Now, move the cursor to the URL field of the web browser and type the default web address of the DAP-1520 extender i.e. dlinkap.local into it.
Press the Enter key in order to reach the Dlink WiFi extender login page.

Here, you will be prompted to enter the default login details of your D-Link DAP-1520 extender.
So, fill in the required details and click the Log In button.
You will be taken to the D-Link DAP-1520 setup wizard that will guide you through the rest of the configuration process.
Now, follow the instructions displayed on the WiFi Connection setup wizard and complete the D-Link DAP-1520 setup process.

Conratulations! You’ve configured your D-Link DAP-1520 extender successfully. Just in case, you need more help regarding the D Link WiFi extender setup process, ping our technicians. They will guide you throughout the entire process.

D-Link DAP-1520 Setup Using QRS Mobile App

D-Link facilitates its users to perform D-Link DAP-1520 setup using the mobile application called QRS Mobile. Setting up the Dlink WiFi extender using the QRS Mobile app is quite easy. All the prerequisites for the D Link extender setup process via the QRS Mobile app will remain the same as the Manual method. The only thing you have to bring into action is your mobile device or tablet instead of a computer.

Walk through the instructions given below in order to perform D-Link Dap-1520 setup using the QRS Mobile app:

Ensure that your D-Link DAP-1520 extender is placed close to the existing router.
Now, download the QRS Mobile app on your mobile device or tablet using the Google Play Store (Android OS) or App Store (iOS).
The installation process will take a few moments.
As soon as the app gets properly installed, launch it.
Now, tap the Start button.
Tap the Next button so that the QRS Mobile app will detect your DAP-1520 extender.
Thereafter, tap the Device Password option and create one for further logins.
Read the on-screen prompts and follow them carefully.
Lastly, a screen consisting of the Summary of the settings of your D-Link DAP-1520 extender will be displayed.
Tap the Save button to finish the D-Link DAP-1520 setup process.

Your D-Link DAP-1520 extender is all set to turn the dead zones into fun zones. So, connect your wireless client devices to the extender’s network and start using the internet.

D-Link DAP-1520 Setup Using WPS Method

If you don’t want to use a mobile phone or a PC to set up your D-Link DAP-1520 extender, then here’s another method to configure the device. You can make your D-Link DAP-1520 extender up and running with a single push of a button. However, to use this method, your existing router should also have the WPS button.

Follow the below-listed instructions in order to perform D-Link DAP-1520 setup using the WPS button:

Find the available power outlet near your router and plug your D-Link DAP-1520 extender into it.
Set the Power button on your extender to the ON position and wait until the power LED is blinking amber.
Press the WPS button on the D-Link DAP-1520 extender.
Once you do that, the Status LED on your Dlink WiFi extender will start blinking.
When the Status LED turns solid green, it means you’ve successfully configured your D-Link DAP-1520 extender.
You can now unplug it from the existing wall outlet and move it to another place to access a blazing-fast internet connection throughout the home.

In this manner, you can perform D-Link DAP-1520 setup using the WPS method. Just in case, the Status LED keeps blinking even after pushing the WPS button, we’ve got your back. Contact our experts and get the extender installed in no time.

Common D-Link DAP-1520 Extender Issues

Since the DAP-1520 extender is a technical device, facing issues with it is not uncommon. Given below is the list of some issues that users can come across while using their D-Link WiFi extender:

D-Link DAP-1520 extender limited WiFi connectivity.
D-Link extender won’t connect to the internet.
Can’t access the D-Link DAP-1520 setup wizard.
Unable to log in to the D-Link WiFi extender using the QRS Mobile app.
D-Link DAP-1520 shuts down at inconvenient times.
Can’t assign a static IP address.
Forgot the D-Link extender login password.
Unable to configure the extended wireless settings.
D-Link extender delivers poor internet performance.
D-Link DAP-1520 extender power LED does not stabilize.

If you are following any of the aforementioned issues, try to reboot your DAP-1520 extender. It will help in relieving your extender from technical glitches.

Don’t know how to reboot your D-Link WiFi range extender? Here are the do-follow instructions:

How to Reboot D-Link DAP-1520 Extender?

Disconnect all the wired or wireless devices connected to your DAP-1520 extender.
Once done, switch off the D-Link extender and unplug it from the wall socket.
Now, let the device stay idle for a few moments.
Plug the D-Link DAP-1520 extender back into the wall socket and switch it on.

After rebooting the D-Link extender, you might be able to get rid of the issues mentioned above. If you won’t, resetting the extender will help you.

How to Reset D-Link DAP-1520 Extender?

If you don’t what the term ‘Reset’ means, then let us tell you that resetting the D-Link extender will wipe out all the customized settings. It means you need to perform D-Link DAP-1520 setup from scratch after resetting the extender.

Here are the instructions you need to follow in order to execute the Reset process:

Ascertain that your DAP-1520 extender is receiving an adequate power supply.
Disconnect all the devices connected to your extender. No matter whether you’ve connected them using a wired source or a wireless one.
Now, look for the Reset button on the D-Link DAP-1520 extender.
Take a paper clip or a similar-looking object.
Use it to press the Reset button.
Wait patiently until your device does not get restored to the factory default mode.

After resetting the WiFi device, consider reconfiguring it using the Manual method, with the help of the QRS Mobile application, or using the WPS button.

Just in case, resetting the D-Link DAP-1520 extender fails to work for you, get in touch with our experts. They are standing on their toes to relieve you from all the D-Link extender-related issues and provide you with a wonderful experience with your WiFi device.