D-Link Extender
February 21, 2022 / Joe Campbell

My D-Link Extender Keeps Disconnecting. How Can I Fix It?

Millions trust D-Link WiFi extenders to experience a lag-free internet connection throughout the house. However, their internet experience can be ruined if their D-Link extender keeps disconnecting and they have no clue about behind-the-scenes. If you are also troubled by the same problem, then this post will help you overcome it. Here, we will not only share the reasons behind this issue but also provide you with a list of feasible solutions to get rid of it. So, let’s get the ball rolling.

There are plenty of reasons that might be forcing you to face the D-Link extender keeps disconnecting issue. Here, we’ve sorted the most prominent ones:

  • Your D-Link extender has become victim of technical glitches.
  • The D-Link extender is not receiving proper signals from the router.
  • Your WiFi range extender is overheating.
  • The WiFi signals of your D-Link range extender are getting interrupted.
  • The firmware of your D-Link range extender has become outdated .
  • You have not performed D-Link extender setup properly.

Whatever the reason might be, implementing the below-mentioned troubleshooting hacks will help you get rid of the D-Link extender keeps disconnecting issue with ease.

Reboot the D-Link Extender

Let’s begin troubleshooting the issue with the easiest and most versatile hack i.e. rebooting. The process of rebooting will help you get rid of technical glitches. So, have a glance at the following steps in order to give a fresh start to your D-Link extender:

  • Disconnect all the devices connected to your range extender.
  • Switch off your D-Link extender.
  • Unplug the extender from the wall outlet.
  • Give your D-Link extender some time to rest.
  • Plug the extender back into the power outlet.
  • Switch on your D-Link extender.
  • Reconnect your devices to the extender.

After rebooting your D-Link extender, check whether you are still facing the continuous disconnection issue or not. If the rebooting process fails to bring you luck, check out the next troubleshooting hack.

Bring Extender Close to Router

For the optimal performance of your D-Link range extender, it should have a stable connection with the existing router. To ensure this, consider placing both WiFi devices in close proximity.

If you’ve used a wired connection, make sure that the Ethernet cable is free of damages. If the connection is wireless, do not place WiFi devices too close to avoid a clash of their WiFi signals.

Avoid Overheating

Being a technical as well as a networking device, your D-Link extender will inevitably produce heat. Still, you can mitigate this heat by placing the extender in a cool place. So, make sure that your D-Link range extender is placed in a well-ventilated room.

Know that the extender might also overheat due to the dust accumulated over its surface. So, consider cleaning it regularly.

Eliminate WiFi Interference

If your D-Link extender keeps disconnecting, then try to eliminate the WiFi interference creating objects and devices present around it. For this, ensure that your D-Link extender is not placed near devices that radiate electromagnetic waves.

Besides, do not place the D-Link extender near objects containing a large amount of water or thick concrete walls.

Update the Firmware

Another step that you can take to abolish the D-Link extender keeps disconnecting issue is to update the firmware. It will add new features to your device and facilitate you with a smooth and seamless internet connection.

The firmware of your D-Link extender can be updated by accessing its web-based management utility. However, you are free to contact our experts at any time of the day in case you need help regarding the D-Link extender firmware update process.

Reconfigure D-Link Extender

Unfortunately, reading this point means that the issue you’re facing hasn’t been resolved yet. Want to know why? BThe reason is the improper configuration of your D-Link extender. So, don’t wait to reset your D-Link extender.

To execute the D-Link extender reset process, refer to the steps given below:

Ensure that the D-Link extender is receiving an uninterrupted power supply.

Now, locate the Reset hole on your D-Link range extender.

Grab a toothpick and insert it carefully in the Reset hole.

Your D-Link extender will get restored to the factory default mode.

Now, perform D Link WiFi extender setup from scratch.

There We Go!

Did the troubleshooting hacks mentioned in this post help you in resolving the D-Link extender keeps disconnecting issue? If the answer is yes, then we would like to congratulate you. If you still have no luck, then waste no more time contacting our technical experts.

Disclaimer: We at d-linkextendersetup.com provide online support and information for issues with D Link WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.